«INDELA» | Independent Development Laboratory

INDELA ATA-5800+

Auto positioning antenna system

UAV БПЛА Auto positioning antenna system INDELA ATA-5800

Description

Data transceiver system INDELA ATA-5800+»is a complex of receiving and transmitting of telemetry and video information downlink and uplink via radio channels with the possibility to receive information at several receiving stations. At Customer’s request the data transmission from UAV into the communication line of command control center of tactic level forces is available.
Data transceiver system INDELA-ATA 3800 is designed to supply communication between ground control station and UAV at middle and long distances within line of sight at distances up to 100 km. Communication is performed via constant automatic antenna positioning on the UAV, transmitting commands to the UAV, receiving video information as well as data about status and payload in real time.

Telemetry channel (902-928MHz) with “INDELA-L15” antenna ensure communication within line of sight of up to 100 km and a digital broadband 40-Mbit communication channel (5200-5800MHz) with “INDELA-58S” panel antenna ensure data transmission (video, telemetry etc.) within line of sight of up to 45 km. Communication is supplied via constant automatic antenna positioning for an UAV with accuracy of - + 5 angular degrees.

Antenna is based on a common carrier pillar, where 11 directors for “INDELA-L15” antenna, loop vibrator, reflectors, plastic box with a matching loop, director section with 6 directors and a radio modem are located.

Combined planar antenna “INDELA-58S” with a digital broadband modem “INDELA-RM5800” is designed to transmit data at 40 Mbit (video, telemetry) within line of sight of up to 45 km. It operates in 5.8 GHz frequency range and uses Spread Spectrum technology. Many nonoverlapping channels.

INDELA-5800A antenna.

INDELA-380A antenna.


Digital broadband modem INDELA-RM5800A


Digital СOFDM transceiver INDELA-RM380A

Key specifications

Antenna orientation accuracy angular degree + 5
Rated speed of antenna positioning degree/s 45
Antenna positioning range in horizontal plane angular degree unlimited
Antenna positioning range in vertical plane angular degree +90 and -90
Permissible wind speed m/s 40
Permissible range of operating temperatures °C from -40 to +55
Direct current supply unit voltage V 12 and 36
Required oil volume (Synthetic Motor Oil) cubic cm 250+10
Mass kg 18,5

Key specifications

Technical characteristics: INDELA-L15
Antenna power gain dBi 16
Directivity dBi 26
Impedance Ohm 50
Number of elements 15
Length m 1,2
Mass kg 1,065
Modem characteristics: INDELA-RM920
Frequency range 902-928 MHz
Propagation method Frequency Hopping/DTS
Error correction Hamming, BCH, Golay, Reed-Solomon
Error detection 32-bit checksum, ARQ
Encoding Optional
Communication range Up to 100 km within line of sight
Sensitivity -108 dBm at 10{-6} BER
Output power 100mW – 1W (20-30 dBm)
Serial interface TTL
Rate of exchange with the host 230.4 Kbit
Rate of exchange on the air 19.2 Kbit – 1.3824 Mbit
Operation modes Point-to-Point, Point-to-Repeater, Peer-to-Peer
IP3 input (antenna) +12 dBm
Receiver sensitivity
Chosen channel 60 dB
Adjacent channel 75 dB
Outside the range >90 dB
Power consumption
Supply voltage 8-14 V
Sleeping mode < 1 mA
No contact 20 mA
Data import <280 mA
Data transmission <1500 mA
Temperature range -40 - +85 С


Auto positioning antenna system’s operation can be divided into the following stages:

a) 900 MHz antenna together with a modem receives telemetric signals from an aircraft and transmits them via connecting device (interface 10/100BaseT) to the ground control station host computer.

b) Ground control station host computer makes necessary calculations and on the basis of data obtained forms instructions for electric motor control unit.

c) Electric motor control unit effects timely switching on/off of electric motors depending on the instructions received via the connecting device as well as controls rotation speed, rotation direction and number of rotations of each motor separately. As a result rotary support effects positioning of antennas for an unmanned airborne vehicle with the accuracy of - + 5 angular degrees.

d) Receiving planar 5800 MHz antenna together with “INDELA-RM5800” digital broadband modem receives, processes and transmits data via connecting device (interface 10/100BaseT) to the ground control station.

Additional video camera in the auto positioning antenna system allows carrying out visual control during takeoff and landing. Delivery set does not include thermobox with a video camera. Neither it includes basis, which is designed and manufactured by the consumer depending on the application environment. System’s user decides himself where to maintain the rotary support: onto a mast, car roof, building roof or onto the ground. When choosing a place and method of mounting, one should provide line-of-sight propagation of the signal.

Key specifications

Technical characteristics: INDELA-58S
Operating frequency range MHz 5800
Antenna power gain dBi 23
Horizontal flare angle degree 11
Vertical flare angle degree 11
Modem specifications: INDELA-RM5800
Operating frequency range 5800 MHz
Error detection ARQ
Control Telnet, SNMP, RADIUS
Data transmission rate 54 Mbit/s half duplex, adjustable
Transmitter power up to 36 dBm EIRP (including antenna)
Transmitter sensitivity -114 dBm (including antenna’s 23 dBi )
Transmission type OFDM/QPSK/16QAM/64QAM
Interface 10/100BaseT IEEE802.3
Operating temperature -40 – +85 Cº
Mass 2,5 kg
Size 305*305*70(mm)
Power consumption
Input voltage 12 up to 28 Volts DC

Key specifications

On-board antenna characteristics: INDELA-5800A
Antenna power gain dBi 8
Frequency MHz 5725-5850
Impedance Ohm 50
Polarization vertical
Horizontal beam width degree 360
Vertical beam width degree 16
Maximum input power W 100
Mass gram 130
Modem characteristics: INDELA-RM5800A
Operating frequency range 5.2-5.8 GHz
Transmission type OFDM/QPSK/16QAM/64QAM
Error detection 32-bit checksum, ARQ
Communication range Up to 50 km within line of sight
Output power 36 dBm (including antenna)
Sensitivity -94 dBm
Interface Serial Data, RS232, RS422, RS485, LAN Ethernet 10/100BaseT IEEE802.3
Rate of exchange on the air 54 Mbit
Operation modes Point-to-Point, Point-to-Repeater, Peer-to-Peer, Mesh
Operating temperature -40 – +85 Cº
Mass 0,398 kg
Size 135*89*50 mm
Power consumption
Supply voltage 12-30 V
 

Key specifications

On-board antenna characteristics: INDELA-900A
Antenna power gain dBi 3
Impedance Ohm 50
Mass kg 0,17
Modem characteristics: INDELA-RM920A
Frequency range 902-928 MHz
Propagation method Frequency Hopping/DTS
Error correction Hamming, BCH, Golay, Reed-Solomon
Error detection 32-bit checksum, ARQ
Communication range Up to 100 km within line of sight
Sensitivity -108 dBm
Output power 100mW – 1W (20-30 dBm)
Serial interface TTL
Rate of exchange with the host 230.4 Kbit
Rate of exchange on the air 19.2 Kbit – 1.3824 Mbit
Operation modes Point-to-Point, Point-to-Multipoint, Store &Forward Repeater, Peer-to-Peer
Power consumption
Supply voltage 8-14 V (12-28 V optional)
Sleeping mode < 1 mA
No contact 20 mA
Data import <280 mA
Data transmission <1500 mA
Temperature range -40 - +85 С

KIT DESCRIPTION:

Auto positioning antenna system (INDELA-ATA) - 1 piece.

Telemetry channel antenna (INDELA-L15) - 1 piece.

Telemetry channel modem (INDELA-RM920) - 1 piece.

Planar telemetry and video channel antenna (INDELA-58S) - 1 piece.

Telemetry and video channel modem (INDELA-RM5800) - 1 piece.

Ground control station software and data exchange protocol description - 1 piece.

On-board telemetry and video channel antenna (INDELA-5800A) - 1 piece.

On-board telemetry and video channel modem (INDELA-RM5800A) - 1 piece.

Antenna with an on-board telemetry channel modem (INDELA-RM920A) - 1 piece.

 


Copyright © 2010-2015 INDEPENDENT DEVELOPMENT LABORATORY Inc. All rights reserved. Pricing, specifications and content all subject to change without prior notice.